At the end of the day I had 5 stocks completed, the drilling on the wood lathe went ok but the shaping and finalizing the stocks on the metal work lathe took the time. Also I had problems with the motor, it kept on speeding up then slowing down, I had to reduce the rpms to keep it stable, and so I was cutting slower. Anyways, it is progress and still on schedule.
Today I finalized the dates of the workshop at Newcastleton Folk Festival, so it is official, I will be giving a beginners workshop on the “Bellows blown Small-pipes”. The aim of the workshop is to introduce the student to the techniques of bellows blown piping, with ideas on bellows technique, bag pressure, holding a note, keeping the drones steady, and if there is time playing a scale… basically everything except learning melodies….that is for another workshop. With these techniques one can adapt to any of the bellows blown bagpipes (Irish, Border, Northumbrian, Scottish Small pipes, Pastoral, Dudy, Cornemuse, Mussette, etc.), as the basics are the same. If you are buying a set of bellows blown pipes with these techniques you can see if the pipes are in tune, working, playable… without the basic techniques this is impossible.
Monday, April 20, 2015
Stocks, Stocks and more Stocks
I realize I am starting late in documenting my attempts at making “small pipes” it is better to start now while I am still in the process of making, than to leave it and forget what I have done. The idea is to make at least 6 sets of small pipes to use in workshops at folk festivals. I think between 6 and 10 sets are a realistic number, 6 being the minimum to start with then increase it if I have the time. I get the chance to give my first workshop at the Newcastleton Folk Festival in July 2015.
There has been a lot of experimentation over the past year, but a few months ago when I was told I could do the workshop I had to get together the experiments (that worked) and start assembling them. I should also add that most of these experiments were done in Madrid, Spain. There I had tools and wood easily to hand, on returning to the UK I had to source all the materials again and things were harder to find here, and some things were not possible to get, so I had to begin again and experiment. Time was running out but today I thought to allocate time to each stage, for example last week and this week I dedicate my time to making stocks and by the end of the week I move onto the next stage eg. Drones. By this method I should complete at least some if not all of the small pipes in time, leaving enough time for tuning! So I began today by making stocks for each bag that did not have them, and I will work my way through the missing stocks systematically until all have them.
I have made 6 bags so far (I have made more, if I need them), I have inserted some of the chanter stocks, blow pipe stocks and drone stocks, but as I go along I notice I have to do little changes to them. For example, originally I had made the internal diameter of the blowpipe sock 16mm but I later noticed that it would have been better to make it 18mm so I have to enlarge it. Not big jobs but multiply it by 6 it can take a few hours. This is what I mean by “experiments”.
Today I made 4 bag stocks: 3 chanter stocks and 1 drone stock. The drone stock took most of the day due to slowly boring the stock then shaping the outside. I had an old bag which was precut, so I had to match the diameter of the hole in the bag, I did not have a large diameter piece of wood and when I found one it took some time to prepare it for drilling.
The 3 chanter stocks were not a problem; these can be tired into the bags when I get some better twine. This will complete what is required for the 6 sets.
This morning I placed the 6 bags on the floor and placed beside them the things I have made so far. I had made about 3 sets but something was wrong with all of them, so I will have to take the stocks out of the bags and redo them at a later date. It was a useful exercise as I could write down what is still needed to do, and what things I need to prioritize. The 3 bellows I have already are nearly complete I need to make one more here (as I have the cheeks cut already) and do the rest in Spain.
There has been a lot of experimentation over the past year, but a few months ago when I was told I could do the workshop I had to get together the experiments (that worked) and start assembling them. I should also add that most of these experiments were done in Madrid, Spain. There I had tools and wood easily to hand, on returning to the UK I had to source all the materials again and things were harder to find here, and some things were not possible to get, so I had to begin again and experiment. Time was running out but today I thought to allocate time to each stage, for example last week and this week I dedicate my time to making stocks and by the end of the week I move onto the next stage eg. Drones. By this method I should complete at least some if not all of the small pipes in time, leaving enough time for tuning! So I began today by making stocks for each bag that did not have them, and I will work my way through the missing stocks systematically until all have them.
I have made 6 bags so far (I have made more, if I need them), I have inserted some of the chanter stocks, blow pipe stocks and drone stocks, but as I go along I notice I have to do little changes to them. For example, originally I had made the internal diameter of the blowpipe sock 16mm but I later noticed that it would have been better to make it 18mm so I have to enlarge it. Not big jobs but multiply it by 6 it can take a few hours. This is what I mean by “experiments”.
Today I made 4 bag stocks: 3 chanter stocks and 1 drone stock. The drone stock took most of the day due to slowly boring the stock then shaping the outside. I had an old bag which was precut, so I had to match the diameter of the hole in the bag, I did not have a large diameter piece of wood and when I found one it took some time to prepare it for drilling.
The 3 chanter stocks were not a problem; these can be tired into the bags when I get some better twine. This will complete what is required for the 6 sets.
This morning I placed the 6 bags on the floor and placed beside them the things I have made so far. I had made about 3 sets but something was wrong with all of them, so I will have to take the stocks out of the bags and redo them at a later date. It was a useful exercise as I could write down what is still needed to do, and what things I need to prioritize. The 3 bellows I have already are nearly complete I need to make one more here (as I have the cheeks cut already) and do the rest in Spain.
Subscribe to:
Posts (Atom)